glass filled PA ashtray Auto parts hot runner molds with heat treatment steel and NITTO components 

1.     Use of inserts cores for features (rib, boss ...) with height more than 10mm

2.     Use of insert cores for the circular, elliptical and any rectangular features.

3.     Integrated interlocks in both longitudinal and lateral directions 

4.     Inserted wearing plate with lubricant grooves for all the interlocks and areas subjected to friction

5.     At least 2 degrees less interlock angle in compare with shut-off surfaces

6.     Pressure plates to protect shut-off surfaces

7.     Suitable cooling circuits for cavity, core, moving parts and any part forming the impression(s)

8.     Appropriate cooling system with optimum production cycle time 

9.     Homogenous cooling system with T < 10 °C on impression(s) surface

10.  Proper cooling circuits with T < 3 °C between input and output temperature of coolant

11.  Marking of water inlets and outlets

12.  Slides' positioning safety system

13.  Wearing plates for slides

14.  Use of magnetic built-in sensors for the hydraulic cylinders sliders and Micro-switches as the safety system of the ejector system and any lifters (each lifter should have rectangular unified shape and independent electrical sensor).

15.  Ejector plate(s) with independent guiding pillars.

16.  Push back pins for ejection system

17.  Support legs

18.  Lifting devices on fixed and moving sides which should be delivered by the tool

19.  Tool transportation strip(s)

20.  Water couplings on the opposite operator side

21.  Hydraulic/ Pneumatic couplings on the opposite operator side

22.  Electrical connectors on the opposite operator side close to the top (On top of all water and hydraulic couplings)

23.  Electrical wiring is to be positio